When using the Internet, there are many situations where the speed becomes slower or the signal becomes weaker than expected. In particular, Wi-Fi performance varies greatly depending on how you install the router. So let’s summarize. Let’s always look at how to keep the network optimal, how to solve problems without AS, and how to maintain the speed difference between carriers
1. Router antenna orientat
The simplest way to increase Wi-Fi speed is to redirect the router antenna. Usually, antennas of Wi-Fi routers have a structure that spreads wireless signals to the side. Therefore, if the antenna is set vertically, the signal can be 1.35 times stronger.
However, the optimal antenna direction may vary depending on the structure of the house. For example, in a double-layered structure, let’s tilt the antenna about 30 degrees to cover multiple layers. At this time, if the router has two antennas, one is placed vertically and the other horizontally, the signal spreads evenly
2. Select FrequencySK법인폰
2.4GHz / 5GHz When setting up Wi-Fi, you can usually choose one of these two frequencies. Generally I think the higher the number, the faster it is, but it is not the concept of such a number. It’s just a different type.
2.4 GHz is resistant to obstacles and can cover a wide range. On the other hand, its speed is relatively slow. 5 GHz has a high speed. However, its signal reach is short and it is heavily affected by various obstacles.
If it is far from a router, 2.4GHz is good, and 5GHz is best if you use a network near a Wi-Fi router. Even in actual tests, it can be seen that the speed of 5GHz decreases rapidly due to the influence of distance and obstacles, and 2.4GHz is somewhat slow but remains stable over long distances. SK법인핸드폰
3. Using Reflectors 창업렌탈
Wi-Fi signals can be scattered by walls or furniture. Reflectors can be cited as a way to prevent such a phenomenon and focus the signal. When a material such as aluminum foil is attached to the back of the router antenna, the signal is reflected and transmitted more strongly over longer distances. In actual experiments, the speed increased by 37% when the reflector was used. B2B 렌탈
Self-So
1. Reboot
The first way to do it when speed deceleration or disconnection occurs is to reset the power of the router. Wi-Fi routers are likely to be overloaded inside because they remain on and active in a standby state all year round. For that reason, performance can be improved when the power is turned off and turned on for 10 to 15 seconds.
2. Changing the Location
The location of the router is also important. The signal can be weakened if it is hidden by a wall or placed in a corner of the house. The arrangement of open spaces, such as the center of the living room, is more advantageous for wireless signal transmissi